关于灯具塑胶材质问题

1314201 · 发表于 2012-11-6 21:04

外置电源灯具电源有认证过61347认证（独立式电源）请问电源输出端接的灯具的塑胶是否可以用没有认证的？（UL认证）

520168 · 发表于 2012-11-7 10:38

可以没有UL认证，但是要符合IEC60598-1第13章的相关要求

ryanluk · 发表于 2012-11-7 10:41

Covers, shades and similar parts not having an insulation function and which do not
withstand the 650 °C glow-wire test of 13.3.2 shall be adequately spaced from any heated part
of the luminaire which could raise the material to its ignition temperature. These parts made of
flammable material shall have suitable fastenings or supporting devices to maintain this spacing.
The spacing from heated parts mentioned above shall be at least 30 mm, unless the material is
protected by a screen spaced at least 3 mm from the heated parts. This screen shall comply
with the needle-flame test of 13.3.1, shall have no holes, and shall have a height and a length
at least equal to the corresponding dimensions of the heated parts. A screen is not required in
cases where the luminaire provides an effective barrier to burning drops

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[IEC灯具] 关于灯具塑胶材质问题

浏览过的版块

安规网为您推荐 /1