|
8.2.5 Compliance with the requirements of 8.2.1 to 8.2.4 is checked by inspection and, if
" _: Y0 P# d8 ~( O% \necessary, by the test with the relevant test probe according to Figures 1 and 2 in IEC 61032" Z9 C# o0 }1 f% s
or by means of the specific test probe prescribed for the component in question.- [) \4 @9 G" ]8 ~* s5 C) S
This test probe shall be applied to every possible position, if necessary with a force of 10 N, an( f$ T- H6 k( K7 X4 ~" V, M
electrical indicator being used to show contact with live parts. |
|