|
看你的具体结构了,很主要的是你的产品有没有外露的可能带电的金属件,你可以参考一下以下章节:
0 G# A w7 s" p" e1 f! V& G9 b; ?# M
6.14.1.1 Non-current-carrying metal parts and metallized polymeric parts that are accessible during user
0 V1 Z; z$ y* u. M" X, Imaintenance or component replacement without the use of tools and that can involve the risk of shock
# N! y( z |& r; a V/ ]shall be bonded to ground and shall comply with the bond impedance test of Clause 17.2. A luminaire with
5 s# h3 K' B9 E5 Wnon-current carrying parts bonded to ground shall have the resistance of the bonding circuit tested in3 `7 p, S0 q; c! y% @- d
accordance with Clause 17.2.1. If the resistance exceeds 0.10 W, the bonding circuit shall be tested as
2 l4 f$ p4 V9 ~8 O% [& n; @specified in Clause 17.2.3.
- `% o5 u- E- s4 [+ j0 e
5 d; z, Q" p0 v- [ g10.6.1 The cord of a cord-connected luminaire that is required to be grounded shall contain an equipment# R4 i H- T9 E! T
grounding conductor.
: \7 l) J( |# X6 [/ b, |
# Z1 t% `8 g* W' x# \! G10.2.12 A flexible cord providing the sole support of a luminaire or luminaire part shall not be subjected
2 |; y) j# |% {% E) xto kinks or sharp bends, and shall be at least:
* E& O8 y! J, S' ^0 l9 o+ j% ]$ z(a) a not-for-hard-usage jacketed type if supporting a mass of 2.3 kg (5 lb) or less; or
" B! D& t" C1 c' g(b) a hard-usage jacketed type if supporting a mass of 4.5 kg (10 lb) or less. |
|