|
我有一个电源,次级输出端子通过了能量危险测试,但是能用测试手指碰到里面的端子的正负两级
3 ?" {( \ }" E8 [& [算不算合格,标准原话如下1 M- F: `1 }# H% o+ m' M. I1 s* Z
a) A risk of injury due to an energy hazard exists if it is likely that two or more bare
! x* G, H5 C+ I3 k0 R9 Tparts (one of which may be earthed) between which a HAZARDOUS ENERGY LEVEL exists,
* y4 {" {2 y. ^7 L) y4 awill be bridged by a metallic object.. ?/ Z3 t/ |. J' v0 M- i
b) The likelihood of bridging the parts under consideration is determined by means of
8 Q% G0 J' g7 q# x) u3 Ythe test finger, Figure 2A (see 2.1.1.1), in a straight position. It shall not be possible to
# f3 ?) _0 Q0 ^bridge the parts with this test finger, applied without appreciable force.
0 I4 I% t( |# V2 V- ]3 _c) The existence of a HAZARDOUS ENERGY LEVEL is determined as follows:3 L. Y3 \# |: a, _
1) with the equipment operating under normal operating conditions, a variable
7 V O/ n3 j' i; @resistive load is connected to the parts under consideration and adjusted to8 H* E' w6 r$ |7 p7 X) K( G: ?
obtain a level of 240 VA. Further adjustment is made, if necessary, to
& E, s0 O r, \9 c: lmaintain 240 VA for a period of 60 s. If the voltage is 2 V or more, the output* W( U$ \8 P( U: C4 x3 V2 U
power is at a HAZARDOUS ENERGY LEVEL, unless an overcurrent protective device( K/ `* ~9 J9 o0 M3 k( c
opens during the above test, or for any other reason the power cannot be
$ W8 z; Z: U5 fmaintained at 240 VA for 60 s;4 e% w2 @' v5 y7 [
2) the stored energy in a capacitor is at a HAZARDOUS ENERGY LEVEL if the
! g2 \1 v3 ~& y) w: x8 hvoltage, U, is 2 V or more, and the stored energy, E, calculated from the+ K3 |2 `2 c) q7 c/ N/ }
following equation, exceeds 20 J: |
|