|
as below for EN request
4 C: e0 e! m3 Q: \) W) K( D2 R6 f5 d! M3 D; X# T' G7 N
5.4 Cords on toys (see A.29)
0 a" J; O8 n6 ~) O) e* `" OCords shall conform to the following requirements:5 B8 {+ O5 @; N0 f* e6 _' ?% ^
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
5 n% @" x$ c5 \! {+ U3 y(cord thickness). This does not apply to ribbons.
1 g0 V4 _" |* g4 @; `6 fBS EN 71-1:2005+A8:2009; t3 Y+ p3 q0 v; M
Licensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)4 g: N7 r) O1 h( V* Y. E: m
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall; l) _$ o" h; j% t) |2 y
either:
/ h: z) f( E$ L" \2 u/ j( ~, c not exceed 220 mm when stretched by a force of (25 ± 2) N; or% x% d/ k) ]% k; I" V
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched9 M8 J" j0 ^8 y) ]
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated& d* t5 M- f6 |
without altering the characteristics of the joints (see Figure 10).1 W! Y$ d; e, B$ }1 B1 W6 b3 s" a
The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing% n0 G0 J8 |0 D7 Z
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall
( K3 R5 o+ H$ L" k; Z6 `: b1 Jbe measured as a part of the entire cord (see Figure 11).# U x& m, Z. O6 ?" ]
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.5 w8 d' t4 F, @! Y2 a
d) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.( `- s2 O# }, c6 R3 N+ @+ I
e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
! F7 S p" m* z/ xstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|