|
as below for EN request
7 y! N7 _9 ~5 R# H( K2 o# R* x5 H" c( g6 B
5.4 Cords on toys (see A.29)7 S: X7 V1 c+ }$ B4 u; A, b
Cords shall conform to the following requirements:
7 C1 S" O4 {! `2 [/ G/ L. U8 z/ pa) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
" C/ t% N/ |7 r: \1 b) A$ s" q(cord thickness). This does not apply to ribbons.
; e3 W$ @) a& ?BS EN 71-1:2005+A8:2009* d3 w: F+ g7 K" e
Licensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)
0 F: y" W; L7 y: D( gb) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
" {, M( B% S; z# A4 a% Leither:1 m( O* b9 G5 i8 ^5 d
not exceed 220 mm when stretched by a force of (25 ± 2) N; or" z9 |3 [( `' u/ L
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched
) i3 F0 `% e- e0 d- w7 r6 c6 @+ o' sby a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated
/ |/ q$ J+ G" Wwithout altering the characteristics of the joints (see Figure 10).( B% K8 \6 b# y) x% L: I6 P, y' b
The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing* z0 \8 G0 p8 _- i2 w- p- D
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall$ U1 {; ]0 v, z; T
be measured as a part of the entire cord (see Figure 11).6 I* J5 z* C9 {* R; C
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.* Y9 R3 N# E7 e6 w, K* W* k# q) c7 Q
d) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.
( j) i! e8 [5 _e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when' G3 X0 R6 r9 Y+ C0 b
stretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|