|
|
关于这个待机符号使用关键在于理解待机定义，欧盟ERP指令对应法规对待机有定义， (EC)1275/2008，想更深入了解可以参考一下：
% H2 e2 H4 P9 \* G/ g/ ^‘standby mode(s)’ means a condition where the equipment is connected to the mains power source, depends on energy input from the mains power source to work as intended and provides only the following functions, which may persist for an indefinite time:6 T1 ^, R6 p6 Q3 a$ p
－待机模式：设备连接到主电源，仅提供以下功能 1）&2），若没有激活它将一直处于这种状态：
1 A- k$ o( P1 ]2 ]1） @reactivation function, or reactivation function and only an indication of enabled reactivation function, and/or! K4 ]/ h. |/ b2 W0 P
－再激活功能，或再激活功能以及仅能再激活功能的指示，和/或
. ?9 @+ T& Q4 A) t7 O2） #information or status display;- [9 L! a9 M, X+ U6 A
－信息或状态显示: I% r+ u" r! ^/ B# Q8 o
@ ‘reactivation function’ means a function facilitating the activation of other modes, including active mode, by remote switch, including remote control, internal sensor, timer to a condition providing additional functions, including the main function;
6 R# r$ D* }3 `8 m－再激活功能：通过遥控开关、包括遥控器、内部传感器等来提供的附加功能而有助于激活其它模式的功能，也包括主功能。
5 M4 P1 z- ], T- a. \3 C% ?7 M# ‘information or status display’ means a continuous function providing information or indicating the status of the equipment on a display, including clocks;" B% v9 `- H1 j6 {: d2 A
－信息或状态显示：是指一个连续的功能：: ?" a& Z& U: {- l1 X1 G
在显示屏上提供信息或设备状态的功能，也包括时钟。
; h$ Y, `2 d" {" D1 [‘active mode(s)’ means a condition in which the equipment is connected to the mains power source and at least one of the main function(s) providing the intended service of the equipment has been activated;
" I( _) s5 y( F. J |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册安规
x
|
[复制链接]
/1 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2020-3-6 19:29
显身卡
楼主