|
20.101 Ovens having doors with a horizontal hinge at their lower edge and on which a load is likely to be placed shall have adequate stability.
6 Z* J$ \, W4 k# k) |% b# h* T, N2 y6 g1 d- {. ~) ?
The oven is placed on a horizontal surface with the door open and a mass of 3,5 kg is gently placed on the geometric centre of the door.# I% i: L6 i: J' t) y
The oven shall not tilt.
+ ]. e$ Z$ \, S, U6 M s
6 s# I7 f9 {( m- f5 h: l2 Q6 b2 R7 Z
This test is not carried out on ovens with doors having a dimension less than 225 mm from the hinge to the opposite edge or on ovens with doors which cannot support dishes in the fully open position.0 @; X9 |6 Y6 g5 I8 t
& L4 z9 E, w/ |" i+ O* E% d- s3 u J4 s; u% M1 b0 x' `* [, _: d6 Z
主要想问下如何确定门不能够支撑盘子“on ovens with doors which cannot support dishes in the fully open position”?4 o# p1 R P" a# ^6 D$ _+ p
目前这个非常有歧义,过程中个比较困惑?
, C' E3 [1 ~' a" ]% X* E/ i+ g①这个dishes一般是否都理解为ovens自带的那个盘子?8 [8 k+ e. r! z/ T/ H1 n5 X
②支撑盘子是否为把盘子搁在门上?只要盘子不会掉线来(比如滑动)就认为是支撑了?
4 v2 o& E3 I. B X. E. X③做这个测试时,烤箱放置的水平面应该是怎么一个位置?如下图:
, c2 p7 A: J2 r; h( \9 T6 ?6 H④目前有遇到说把只要门的开启角度大于90°,比如说110°,有个比较明显的向下倾角就认为是不能支撑盘子,这个大家觉得是否合理?目前有遇到开合较大105°,但是自带的盘子仍然可以放在门上。
5 U5 j6 l3 Z h v |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册安规
x
|