PCB板上的标识问题

jcyxb · 发表于 2013-5-27 15:35

PCB板上的UL file no 和型号是否必须要标明，例如（E226038 ET-005)

tsunn · 发表于 2013-5-27 15:46

需要包含以下四个内容。
A:Recognize marking---认可标志RU
B:Recognize Company name or trade mark---认可公司名称或者商标
C：Type designation---UL型号
D:Factory ID(if any)---工厂代码（如果有）
对于认可产品，可以不标ul file no.

Andy.Yang · 发表于 2013-5-27 15:54

For this, you need to check the description of its UL FUS procedures, and in the marking requirments, there should be indications.

Normally, the UL file No. is not an necessary element for PCB, but sometimes, the E No. was used to indicate the recognized company name, and similar. So totally depends on the description of its UL file...

Andy.Yang · 发表于 2013-5-27 16:01

tsunn 发表于 2013-5-27 15:46 , [# |2 W% j/ E, _' X* ] x- \& w1 c
需要包含以下四个内容。" W. c7 ~% T9 F/ N
A:Recognize marking---认可标志RU6 l. P6 l) H) l% I. m( \7 K7 C
B:Recognize Company name or trade mark---认 ...

UL does not ask to indicate the recognized mark-RU, only for the UL listed products, the "UL" with a circle symbol is necessary, but for "RU", it's not an necessary element.

And in most cases, the manufacturers select to indicate "RU" on their products, in order to easily show that their products are UL qualified, so unless there is a description in the UL FUS procedure that the "RU" is a must element, then no need to show "RU" on the products.

So finally, for UL recognized products, we need to check the marking requirements in the FUS procedure, and find out what should be marked, or not necessary to be marked, that's the only option.
But if the RU mark was indicated on the label/products, then the RU mark itself should comply with the description of the Recognized Marking Data Page in the FUS procedure...

Andy.Yang · 发表于 2013-5-27 16:05

本帖最后由 Andy.Yang 于 2013-5-27 16:10 编辑

Cite an example as below:

You can check the attached for one PCB manufacturer, so the RU is not a necessary element, and the E No. is not a necessary element, I believe there is similar description in its UL FUS procedure...

Andy.Yang · 发表于 2013-5-27 16:15

But for UL listed products, the UL listing mark must be indicated on the label&products, and four elements shown below must be closely indicated:
1. "UL" with a circle;
2. The word "listed";
3. The control No.: normally four characters combined by numbers and/or letters;
4. The product identity.

And above could be found in the LMDP of its FUS procedure...

tsunn · 发表于 2013-5-27 16:18

Andy.Yang 发表于 2013-5-27 16:05 3 n) t4 c5 |! r, ?. Z1 v
Cite an example as below:
9 I0 j0 |% P. t- }2 `, h, ] G. D
You can check the attached for one PCB manufacturer, so the RU is not a ...

You are right

jcyxb · 发表于 2013-5-27 17:18

Andy.Yang 发表于 2013-5-27 16:15 : d3 w$ Y4 B$ x _ w- S
But for UL listed products, the UL listing mark must be indicated on the label&products, and four el ...

OK，TKS！

jcyxb · 发表于 2013-5-27 17:21

Andy.Yang 发表于 2013-5-27 15:54 $ a0 J7 a5 Z% l) x2 @0 d
For this, you need to check the description of its UL FUS procedures, and in the marking requirments ...

但是，如果没有file NO号和厂商型号等信息，又如何去区分这个PCB是哪一家的？不能区分哪一家的又怎么知道有认证没有呢？

Andy.Yang · 发表于 2013-5-28 08:46

本帖最后由 Andy.Yang 于 2013-5-28 08:48 编辑

jcyxb 发表于 2013-5-27 17:21
+ E x6 C J) o; ~8 k3 | A但是，如果没有file NO号和厂商型号等信息，又如何去区分这个PCB是哪一家的？不能区分哪一家的又怎么知道 ...

Actually, only the customer wants to know where the PWBs come from, but we have below options to find it out:
1. If the UL file No. is indicated, then directly know the PCB's manufacturer;
2. If the UL file No. is not indicated, then the trade mark and the recognized company name could be the root to find it out;
3. And finally, if the customer still can not dig it, then directly ask the supplier of the PCB, that's the only option.

And if I were you, I can 99% to find the PCB supplier information even there is UL file No. information and without directly asking the PCB's supplier...

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[综合话题] PCB板上的标识问题

相关帖子

评分

评分

本帖子中包含更多资源

评分

安规网为您推荐 /1