|
從IEC60320-1 standard sheet C14 頁中:
6 h! [2 l2 g* A. W& B( E! QThe outline 3) shall be at a distance of 17 −1
4 d7 l4 z, b: s* U( E0 mm from the engagement face at the bottom of the inlet. The distance from the engagement face at the bottom of the inlet to plane A-A may, however, be less elsewhere within the area 1). Plane A-A need not necessarily be extended to the outline of area 1). A rim which is slightly rounded on top is allowed around the recess if it has a thickness of at least 1,5 mm. Retaining devices or parts thereof may be within the area 1). No other parts of the inlet may protrude beyond plane A-A.
8 W# t- n/ m2 ^- V4 @- r/ o; `: U' x1 `( x( M; k$ E8 h
即表示壁厚最少1.5mm, 額外當然還需可通過其它耐壓和物理強度測試. |
|