|
請教UL 817 以下標準的中文意思?! G, h. Q d; c3 T+ {
這抗電弧測試是否只針對連接器呢 ?: _3 [2 X$ g8 N" P3 W
5 P. f6 N2 G) j- k8 Z( f14.7 Resistance to arcing test
) ~- t* v" k& [, Z8 J14.7.1 The connector fittings that were subjected to 50 cycles of operation in the Overload test described( U6 d0 N- v( [, A" E5 P
in 14.4 shall perform acceptably when subjected to an additional 200 cycles of operation under the
% H& w6 M; y4 ^# aoverload test conditions following the temperature test and the repeated retention of plugs test.8 q; ?$ r* O: j# \( M
14.7.2 Alternatively, six representative connector fittings may be subjected to the 50 cycles of operation
6 C1 `$ C) j& Z# A. m3 v/ Cin the Overload test described in 14.4, followed by the Temperature test and repeated Retention of blades! e6 X! A! w9 H( o
test on the connector fittings, and then, to determine resistance to arcing, a second, previously untested
2 ^: d p+ @2 ?+ v4 Pset of connector fittings may be subjected to 250 cycles of operation under the overload-test conditions.& V" ?1 W. s( |; j) O+ V' E) Q2 D
14.7.3 The attachment plug used for this test may be changed after every 50 operations. There shall not
2 p- }" l) L) L4 `/ ^7 l1 Dbe any sustained flaming of the material in excess of five seconds duration. There shall not be any
- f9 ^5 z E1 y* x6 d; m- Qelectrical tracking or the formation of a permanent carbon conductive path that results in a dielectric
7 F0 T, h$ c& u/ o8 c% ^: y; lbreakdown, as determined by the application of a 60 Hz essentially sinusoidal potential of 1500 V
4 e$ Q: W. x! X |
|