|
as below for EN request
# R. J! M: ^: q' z" q( d7 T D2 Q J$ o, `( w$ Y4 W- Z
5.4 Cords on toys (see A.29)# }' R/ e' ]" T
Cords shall conform to the following requirements:8 L, H- _. n Y S. H% _
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
, L- w4 Z' J7 k6 e2 V(cord thickness). This does not apply to ribbons.
" h7 R2 f1 k" V# E" }# OBS EN 71-1:2005+A8:20090 |% o( L9 {* p
Licensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c); i( N- A. W+ I0 o) A: h5 @6 d! \
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
# ^6 t' _+ l$ t geither:
' ?+ h! j/ A' F8 Y" ~1 V) l: ]7 y/ J8 x not exceed 220 mm when stretched by a force of (25 ± 2) N; or& s. i' I9 o4 l8 z% _
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched
8 J. k- R* E$ E2 p- cby a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated
/ J7 r. S$ D! w$ F4 hwithout altering the characteristics of the joints (see Figure 10).
7 g* Q$ g6 }- q# r8 b# \- MThe free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing, T% L; `7 X7 u% M0 N5 D7 B
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall
& D8 a( D- ~. q+ }! Mbe measured as a part of the entire cord (see Figure 11).8 S: j* Y0 E% z* K7 ~8 G: U
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.; j$ v$ d+ ]$ N3 Z
d) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.- x; ^- s5 b- F( ?+ `5 y
e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
% ?& S( D! S9 x* o; H3 z7 Dstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|