|
as below for EN request
: q& ^/ r& ^0 I) ]4 ` s! m7 [- m* Y# y; c. T
5.4 Cords on toys (see A.29)
+ p2 n# P, n" a8 b/ `1 j5 F+ }Cords shall conform to the following requirements:, D1 S7 r. E+ e5 K
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
/ a2 N0 |. C: D1 ] h7 w' o(cord thickness). This does not apply to ribbons.
; d" _3 E1 g7 jBS EN 71-1:2005+A8:2009
/ Y, n" O6 p1 O5 J1 KLicensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)
* v: A% \5 I/ ^! s# I' Jb) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
2 W1 R) T% u% {3 y4 r+ R% U) Ueither:
7 r E& }4 R$ L' y not exceed 220 mm when stretched by a force of (25 ± 2) N; or
) F7 m5 [" W! ~$ s# C0 @8 w2 q) n when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched# u* U. k) G2 A
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated
- M# V/ S+ y& N r7 n) vwithout altering the characteristics of the joints (see Figure 10).
1 E6 P1 |4 v/ O! q! j' x- V( K8 [The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing
- y, _7 X% m" U$ ~point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall5 m. g6 P4 `: a% h2 h* n& X/ M4 {' i% d
be measured as a part of the entire cord (see Figure 11).
0 D7 {& k6 M9 \: y# J8 v: K) Yc) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.
5 B w5 Y2 |8 s2 P. G7 ud) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.
7 J- }& C1 r5 }0 f* E. X8 Ae) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
! d1 n9 R8 {. W4 v z0 h2 hstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|