|
有没有哪位清楚SAA 插座 高压测试要求,对地线脚的高压测试是多少伏?
) H8 W& z9 Y& \" g3 qThe socket-outlet shall withstand, without failure, an a.c. voltage of the value indicated in Table 3.3 applied between the parts set out in Items (a) and (c) of Clause 3.14.2 for 1 min in each case. The socket-outlet shall further withstand, without failure, a voltage of 3500 V a.c. applied between the parts set out in Items (b) and (d) of Clause 3.14.2 for 1 min in each case. The socket-outlet shall be fitted with an appropriate plug during the test.1 J; K# |4 d* X: C
TABLE 3.3 TEST VOLTAGES FOR HIGH VOLTAGE TEST
0 N5 Z$ G- C1 ^0 v3 HWorking voltage (r.m.s.) between parts (See Note) Testing voltage 9 x/ H2 k1 Y( c l# A+ E
≤ 32 V 500 V $ \& J, q9 R8 k( R/ ^* j
> 32 V ≤250 V 1 000 V 7 W. L6 l% X; P# E' J
>250 V ≤650 V 1 000 V + (2 ×working voltage) with a maximum of 2000 V 0 B1 Q, ?: D5 P7 P- v$ x
NOTE: For example, a socket-outlet for connection to a system operating at 415 V between phases and 240 V to earth, would require a test of 1000 + (2 × 415) V between live terminals but a test of only 1000 V between live parts and earth.
0 k+ I4 `6 R: [4 z8 \# T# l9 b; ~. F. D0 ^
3.14.2
9 p/ a, r' M( b, R4 kd,Between live terminals of the socket-outlet and the earthing terminal (if any), with the live terminals of the plug being connected together. |
|