|
as below for EN request) s* n7 s2 v; J, ~, M1 x3 f
7 W7 {% a1 Y- j4 S0 X) y1 X# u
5.4 Cords on toys (see A.29)% n% L8 q4 A& w* j- e
Cords shall conform to the following requirements:
0 Q' H; s5 ^/ W3 r; W% s; _2 ia) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.208 F7 _6 b8 S( f1 ~2 x8 i" M3 H/ q
(cord thickness). This does not apply to ribbons.
4 P' m3 {6 g: bBS EN 71-1:2005+A8:2009 d8 x& o' f* g! g! G) U1 K- l( h
Licensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)
1 G/ p+ U+ x4 F: y1 r2 m- i+ Cb) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall4 q/ i/ y) n& s' {9 i$ K+ c! N
either:, Z( O8 ]* R0 R7 |
not exceed 220 mm when stretched by a force of (25 ± 2) N; or
: @7 U6 W8 k5 t7 [. W" O when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched( e) T V- o0 U
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated
! G; |) R/ `& N X0 E6 {% cwithout altering the characteristics of the joints (see Figure 10).1 d, G3 _+ X, w6 f" v( ~
The free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing6 ~9 t0 r6 W! Z/ Q, v
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall' a; u0 s9 |8 l* u2 A+ z) w9 s
be measured as a part of the entire cord (see Figure 11)." g& [ p @3 L Z
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.
) I: j: y4 A) Z9 Dd) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.
6 N8 @, z. ]% r4 k# @" `8 D4 xe) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when- s" U+ `7 j: ^# U& Z
stretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|