|
有哪位高人知道UL标准中的Pin terminal是什么样的吗?有没有实际照片例子。
9 N7 {3 n' _8 K! i2 R11.2 Pin terminals6 J3 g5 s0 p+ e: r, ?1 a
11.2.1 An appliance intended for use with a detachable power-supply cord shall not be provided with0 M# G* @4 _+ W" J
terminal pins that will accommodate a standard flatiron or appliance plug., h' N# ~3 f7 U- X9 ~
11.2.2 If an appliance is provided with pin terminals, the construction of the appliance shall be such that* w# X+ \3 Q: ^: S- g v) U5 p4 Y
live parts will not be exposed to unintentional contact both during and after normal placement of the+ n3 W# s- w, f1 R! S- g9 M
intended female fitting on the pins." J$ q; J; y" J6 ^% g8 t% r
11.2.3 A pin guard is required, such that:
1 |1 I {) }8 E. v! |! Ha) A straight edge nominally 1/16 inch (1.6 mm) thick placed in any position, across and in2 O' x2 v. Y1 Z
contact with edges of the pin terminal opening without the fitting cannot be made to contact any! D9 M! N7 u7 @) f5 X) U1 E' S6 S
current-carrying pin; and
0 x: v( N2 j6 R7 r* R9 V8 h' tb) With the fitting aligned with the pins and the face of the fitting in a plane located1 ?" j& ^- j5 k$ |; n. }
perpendicular to the end or ends of the farthest projecting current-carrying pins, the probe
$ k8 g4 S% d8 Xillustrated in Figure 7.1 shall not touch any current-carrying pin while the probe is inserted9 o7 ]) u/ {/ N6 o, d: ~
through any opening which is then present.
* f" `3 W6 B. j, u
& B; A* y+ v @/ f9 Z |
|