|
60950的2.1.1.7写到:5 I: {; n7 k U7 K+ P. E) d
/ n9 s0 [' v7 O0 D, w5 `
No test for shock hazard is required unless the nominal voltage of the MAINS SUPPLY exceeds 42,4 V peak or 60 V d.c.
0 G4 _1 i' T7 s就是输入超过SELV的就要去考虑电容放电,这是条件一;
; x5 d. _, c# J/ j6 u! }/ L6 n- S3 t4 Z, J! Y
Equipment is considered to comply if any capacitor having a marked or nominal capacitance exceeding 0,1 uF and in circuits connected to the MAINS SUPPLY has a means of discharge resulting in a time constant not exceeding: 1 s for PLUGGABLE EQUIPMENT TYPE A;! g$ N5 D1 G _0 \, ~
NOTE During an interval equal to one time constant, the voltage will have decayed to 37 % of its original value. B8 {* s6 @( s# y
条件二,如果输入电容(一般看前面跨接L/N的X电容)超过0.1uF的话,针对PLUGGABLE EQUIPMENT TYPE A(非工业插头)产品,它的放电时间常数不能超过1S;
# h. k8 x6 g1 l, P5 G这个放电时间常数计算比较复杂,一般情况都是通过测试去判定,1S内plug端的电压(240VrmsX1.4.1=340Vpeak)下降到初始电压的37%(125.8Vpeak)就pass了。 |
|