|
那个帖子对LZ没有用.请LZ参考一下你们报告的Section General,那里有规定.5 L8 J" C1 A- O6 x
什么算Part?就是组装以后带的Fitting,没有绝对的分类,要具体的东西才能分别.常用的如一个housing,线挡,USB头等都是属于parts.要看看你的出货时候产品包含的总数.' \& I2 a) s: t' w
FORM 1-N: This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device, etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining the form label to be used. One of the four (or less) parts may be a Listed power supply cord.7 O9 f4 d0 \$ q
小于等于4个/ v# y0 R0 J* B2 X
FORM 1-T: This Recognition Mark is used for harnesses consisting of four part (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
7 |# z: y4 N: g: p) F3 Z/ _大于4个2 }1 z) |, ~0 `3 o- G1 E: J2 f
FORM N: This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.
3 B! a0 {& Z+ O$ c, T9 R大于4个,同时这个产品包含了已经认证过的电源线产品.
# O1 U+ C' `/ j# o; _FORM T: This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
4 H, @3 ^, i0 S& L& F! a
' Q9 p0 ], T9 F& g! n& U# ~大于4个,同时这个产品包含了没有认证过的电源线产品.此时个电源线就需要那电源线的标准来评估做测试.
! q' Y, O. b% h, X以上建议LZ只要明白前两种就行了,后面两种很少遇见.而且从目前市场来看,绝大部分都是属于FORM 1-T,至少占90%. 即使遇见了后面的产品到时再问问UL工程师帮忙判断一下即可.我想讲到这里应该没有什么混淆的.至少工作中够用了.本草民认为,知识学习到够用就行.什么都要搞到不明白透彻不罢休的话,很容易陷入技术固执派. |
|