|
那个帖子对LZ没有用.请LZ参考一下你们报告的Section General,那里有规定.7 E- l$ N: J3 P) ]( I. d& p! G
什么算Part?就是组装以后带的Fitting,没有绝对的分类,要具体的东西才能分别.常用的如一个housing,线挡,USB头等都是属于parts.要看看你的出货时候产品包含的总数.- A" {' c- f6 G) M2 d
FORM 1-N: This Recognition Mark is used for harnesses consisting of four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device, etc. is considered to be a part. Simple terminations of the eyelet, ring, open spade or quick-connect types are not counted as a part when determining the form label to be used. One of the four (or less) parts may be a Listed power supply cord.
3 U$ O" T$ c! f5 C8 ]9 r小于等于4个0 f* \' J4 Q5 q5 O; E# A
FORM 1-T: This Recognition Mark is used for harnesses consisting of four part (or less) as described above, using as one of the parts, a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
& p8 ?( v! U; @3 F7 u. l# c5 z大于4个
) d* b$ d9 I4 ?$ X. x6 C, KFORM N: This Recognition Mark is used for harnesses having more than four parts as described above. The harness may include as one of the parts a Listed power supply cord.
: k3 B9 I# D. D$ B* Y6 O大于4个,同时这个产品包含了已经认证过的电源线产品.1 A5 O, ?/ v" }0 x* }' ?) D
FORM T: This Recognition Mark is used for harnesses having more than four parts as described above and having as one of the parts a power supply cord which has not been previously Listed and; therefore, must be subjected to the tests prescribed for a power supply cord.
* A5 X5 } g3 O! u8 A# Y, @# g# J: c9 W, X% n
大于4个,同时这个产品包含了没有认证过的电源线产品.此时个电源线就需要那电源线的标准来评估做测试.: q" s8 x2 r# K2 h
以上建议LZ只要明白前两种就行了,后面两种很少遇见.而且从目前市场来看,绝大部分都是属于FORM 1-T,至少占90%. 即使遇见了后面的产品到时再问问UL工程师帮忙判断一下即可.我想讲到这里应该没有什么混淆的.至少工作中够用了.本草民认为,知识学习到够用就行.什么都要搞到不明白透彻不罢休的话,很容易陷入技术固执派. |
|