软灯条刀压测试

Nezof

低于25V是可以裸露的，你的软管不是起绝缘作用的，除非你的电源是非隔离的
, ]5 w$ U0 Y5 U. z: H3 F; r
+ [+ e# A4 \* y8 Y9 Q1 J  Z所以我赞同你的看法

Kimi1

需要做的 跟有没有电击危险无关

stey

IEC 60598-2-20-2010的CLAUSE 20.16是要参考60598-1第13章节。
低压的绝缘材料也需要做球压，提供附加绝缘的塑胶件不需要做。
! O# B) [* h  V9 b) ^/ s6 JThe ball pressure test does not have to be applied to plastic parts of a luminaire which provide
/ \" g1 G; J+ {: E5 O4 c8 Csupplementary insulation.

13.2 Resistance to heat
/ Q8 d; r" d) D
3 l' q. v) ~6 ?1 _8 yExternal parts of insulating material providing protection against electric shock, and parts of
; Q1 T8 l! z; y) H# q6 \8 einsulating material retaining current-carrying parts or SELV parts in position shall be sufficiently resistant to heat.

13.2.1 Compliance is checked by the following test:
The test is not made on parts of ceramic material or on insulation of wiring.
The test shall be made in a heating cabinet having a temperature 25 °C ± 5 °C in excess of the
operating temperature of the relevant part determined during the temperature test (normal
" p5 `4 {8 m. {% q* C4 doperation) of Section 12, with a minimum temperature of 125 °C when parts retaining currentcarrying
parts or SELV parts in position are tested, and 75 °C for other parts.