UL982 food processor 温升测试时间问题？

EVERGREEN21

广东安规检测
有限公司提供：

小型摆管淋雨试验机

IPX5X6X7喷水试验机

1000L恒温恒湿箱

各种试验指现货

可程式恒温恒湿试验箱

水平垂直燃烧机

自动卷线器试验机

耐划痕试验机

各种灯头量规现货

灼热丝试验机现货

GB1002插头量规

IPX1-X7淋雨现货

IEC61347/UL935镇流器热试验箱

灯具防风罩

IK冲击试验机

UL498插头插座量规

VDE0620插头插座量规

稳定性试验台

家电温升测试角

针焰试验机现货

热电偶焊机现货

家电125mm试验指

E12灯头量规

无绳壶无绳电熨斗插拔寿命试验机

IEC60335试验指甲

UL982 Food processor 温升测试时间有具体要求，ON 3 分钟,off 一分钟。但是产品说明书是15S ON, 1MINS OFF, 那么测试时间怎么搞呀？ 按标准要求做的话，马达坚持不了多久就挂了

plmijb

挂了就不ok, UL 是依标准方式进行的。CHOPPER 是15s 或说明书规定的时间（长者）on/1min off。

fumanlou

食物处理器有多种组件时是分别以各组件测温升？

prod10

如果你的产品具有带面粉功能的附件的，侧要进行打沙ON3min，OFFmin，4cycle的，标准36.19有说明的，大家可以交流下，我现在也是进行食物处理器安规测试

hillerhuang

The temperature test is to be performed in the following manner:
a) Metal cutting-mixing blade (S-blade) –
i) For a food processor supplied with mixing attachments or instructions for mixing
9 J8 n* P& K* o; F6 x/ d4 L, sdough, the cutting-mixing blade is to be installed in the appliance as intended. The
% [* M+ f; |+ S3 i9 vappliance is to be operated for 4 cycles of operation. Each cycle of operation is to
* T' A; s  Y& X$ C+ gconsist of 3 minutes on followed by a 1 minute OFF period. The bowl is to be filled with
dry 50 – 80 core sand, which is to be changed and replaced with fresh sand after each
cycle to a level which causes an input (wattage) to the appliance equal to the average
input noted in the input test when processing the food which resulted in the highest
input. The amount of sand employed is not to exceed the maximum capacity of (total
$ c( h! r9 D5 s% t; B! Z' Camount containable by) the bowl.
ii) For a food processor not intended for mixing dough, the temperature test is to be
performed with the appliance operating for 10 cycles. Each cycle of operation is to
( Y2 a4 w* H3 |) ?' Z$ Mconsist of an on time of 15 seconds or the time specified in the manufacturer’s
instructions, whichever is greater, followed by a 1 minute OFF period. The foodprocessor is to be filled with the type of food which resulted in the highest input during
! \5 w- A; o8 Uthe input test described in 36.19.1, in the quantities recommended in the Instruction
  J/ W/ z' J% k/ x! DManual.
, r. Z. H5 P& q$ N* cb) Slicing disc, shredding disc, or both – The disc to be tested is to be installed in the food
processor bowl as intended. The appliance is then to be operated for 4 cycles of operation,
0 z$ C* x/ m6 g7 uslicing or shredding the food that caused the highest input to the appliance as noted during the
input test. During each cycle of operation the bowl is to be filled to its maximum capacity or to a
maximum-fill indicator, if provided, with the food being processed, followed by a 1 minute OFF
period. The force applied when pushing food through the food processor is to be 1.1 lbf (5 N).
+ C7 d" h! T+ h$ w3 `: s这写的这么清楚了，
刀头是S型的，一般作为搅拌和切断功能的金属刀片。
) R0 q; r! m* D% Y1带搅拌面粉功能的，做4个循环，3分钟开一分钟关为一个循环。
2不带搅拌面粉功能的，做10个循环，15秒开或按说明书时间开（取大值）一分钟关为一个循环。
, F. A- k% n  C+ _圆形光盘状旋转切削的刀片
做4个循环，以最大进给量，关1分钟为一个循环。
' E; Z1 I9 m) _( K5 b
温升测试都是按实际使用情况模拟的，如果说明书和标准的循环时间不一致，一般都会采用说明书上的最为合理。

prod10

哪意思是否打沙时间也可根据说明书规定的时间进行温升测试