|
要看灯串的具体情况而定。' ?9 {; a" v9 |4 X, @
60598-2-20 的20.10.1章节:7 N6 Q3 N2 J5 }. q# a+ z
The nominal cross-sectional area of the conductors shall be not less than one of the following
& E3 W( x7 P! Z+ S1 t1 G& H7 ]values:, T7 B) y/ S' `
a) 0,5 mm2 for ordinary lighting chains with E5 or E10 lampholders or other small
) @+ P, ^, b( G% `7 D, Flampholders.# c& N( V; d( R, l; }
b) 0,75 mm2 for other lighting chains with E5 or E10 lampholders or other small lampholders,
9 W) h* M8 _2 sand for lighting chains with E14, E27, B15 or B22 lampholders and fitted with seriesconnected: a% k3 ^, {) T s5 [
lamps.
# A. \' s3 R; B4 r) T5 gc) 1,5 mm2 for lighting chains with E14, E27, B15 or B22 lampholders and fitted with parallel# b. E' |4 f }4 S# |) f
connected lamps.
4 M0 ~0 B$ R* B; uIf the maximum rated wattage of class III lighting chains and parts of chains supplied by" v" t) p& W! p5 w
SELV is less than 50 W then the conductors of the internal and external cables may have a0 ]- O/ n+ m0 { k5 c5 U& i
cross-sectional area of 0,4 mm2 or less provided that the current-carrying capacity and the
' H; z" q A) p8 |( @mechanical properties are adequate. If the maximum rated wattage exceeds 50 W, the cables' S4 C* L7 N6 K" [$ |1 P) E! c/ r
shall comply with 60227 IEC 42 (see asterisk above). If the wattage is less than 50 W the8 X- X+ C, Y3 X, R8 B3 A
insulation of the cables shall comply with the requirements of 5.3.1 of IEC 60598-1.
$ s1 o. h* `% W$ m, @$ G! aFor sealed chains, the internal conductors may have a cross-sectional area of 0,4 mm2 or less
( \2 |! P6 P# W3 h. c+ W" nprovided the current-carrying capacity and the mechanical properties are adequate. In addition,
4 a6 d; H6 p" K3 iconductors without insulation are accepted provided adequate precautions have been taken to9 Z# M. |6 T2 s% W( T) L, n9 [
ensure maintenance of the minimum creepage distances and clearances and compliance with
9 b/ @6 Y- c+ `the requirements of 5.3.1 of IEC 60598-1.
3 y9 D* ^* _& g) L0 o. |- |6 [Compliance is checked by inspection, measurement |
|