|
我在UL1778:2005 版本第5章中有如下内容:
7 k0 C. [" g/ e0 k5 Electrical requirements and simulated abnormal conditions
2 e, s$ I2 r0 A# C# ZThis clause of the RD applies as applicable, except as follows:0 V- Y- |: [! z% x& M% A
5.2 Electric strength' s, i1 t1 O; Q. v
Additional subclause:
: ~9 X' ^% B/ U" V( d' {& ~+ J5.2.101 Electric strength test. g9 i3 n8 W& J2 S$ L; b
The terminals of across-the-line capacitors shall withstand without breakdown 1000 plus twice % Y: y+ P. T4 |" X8 d% c+ [
rated a.c. voltage, or d.c. equivalent, applied for 1 minute.# t9 x' ?7 o/ W8 s) j, c
An additional pulse current test is under consideration. M9 Y) `9 H) J0 S
其中的RD在标准前面部分有说明是参考UL60950部分的内容,可是在UL60950 中: i5 K7 p4 i- {* D
5.2 Electric strength 部分Tabel 5B中的内容并没有1000V加两倍额定电压的说法。如果我们只是120VAC额定电压的话,基本绝缘按Tabel 5B 只要打1000V AC就可以了。现在的问题是UL1778中的1000V加2倍额定工作电压针对是不是只是X电容?如果针对的只是X电容,那么UL1778基本绝缘附加绝缘等耐压是不是就是按UL60950 table 5B 来进行? 期待高手解答。 |
|