|
| DSH 593
, \/ t9 y6 J9 i5 h& _# V1 H* G5 u" e! s1 q9 \
| New glow wire test requirments (650 C) for parts close to contacts
) G: x# k" M7 Q) ` | Clause 7.1.1.1 of IEC 60947-1 Clause 21.1.5 of IEC 61058-1 X) e% z, F. z: _6 Y8 q6 x
| 61058-1(ed.3) & 60947-1(ed.4)
) E4 y6 }1 C2 w9 Q |
) ?; l8 V9 I5 h" h$ I' ?. qStandard(s)- (year and edition):
, R5 c3 O( s/ J( {IEC 60947-1:2004 IEC 61058-1:2000# Z$ [! U/ G K7 s
Sub clause(s):" M9 n; P' B: j }9 P" A f
Clause 7.1.1.1 of IEC 60947-1 Clause 21.1.5 of IEC 61058-1
) R8 N3 {' R5 r- J/ D3 K9 wSheet n°:
' C+ s! \' r' ] ]: w) R$ L# c. |DSH 593) a7 j* J2 @: z5 h c
Subject:
$ m1 K# l9 Z# n: ~6 k" l3 h2 E0 {New glow wire test requirements (650 °C) for parts close to contacts X" P! h) D/ ~" J
Key words:5 W& o8 p% ^% \
- glow wire- O/ ~6 e; @2 C' O% Y1 U
Decision approved by the 44th CTL meeting 20077 x) t+ ?4 t+ j* X+ G% Z' a
Question:, E2 |5 X6 Z! f# j5 ?
Due to the new requirements of 60947-1:2004, parts close to contacts are subject to glow wire test performed at temperature of 650 °C. Is a glow wire test necessary for the green part (figure 1) or isn’t a glow wire test required for this part?
2 @3 n" M. W2 E/ N8 lDecision:- u% j8 u x) }+ e6 y5 [/ n9 N& l, t
Although the green part (figure 1) of this switch is mechanically separated from the contact element, the glow wire test should be done with 650 °C. During normal operation, the switching element and the contact element are mounted together. Due to this fact and the relatively large amount of material, a test should be done.
: h: z0 z% B) X, Q# {5 z* m; e8 e
) ?6 k* J! l3 w$ [5 u) K4 o* `: D7 ~ |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?注册安规
x
|