|
UL1029a :
- ] |) X$ j+ Q' r+ h5.3.2 Component abnormal conditions
8 G6 O- T/ A3 z/ L- n0 L3 Z5.3.2.1 For electronic devices, various semiconductors (solid state) components and electrolytic capacitors shall be shorted one at a time to determine there would be no fire hazard.5.3.2.2 If it can be determined by circuit inspection that some diodes would not cause a hazardous condition or a short would be the same as the “lamp open” condition previously conducted, the component need not be shorted. Components located in circuits that were capable of delivering more than 50 W of power are to be short-circuited or open circuited in turn. The locus (locations) of the 50 W points can be determined with the method described in the Standard for Fluorescent-Lamp Ballasts, UL 935.
' B5 Z# m/ H7 ~5.3.2.3 The device under test was checked for fire hazards by observation, checked for ignition or
4 n, G5 V# ~4 ~: L5 Xdripping of potting compound, and emission of flames or molten metal from the device enclosure.4 O: N( d+ |! Z
& n% _) g+ O2 U9 C7 [7 r. k我的问题是:元件的短路是在灯点亮之前还是之后? |
|