|
30.2.2 For appliances that are operated while attended, parts of non-metallic material" |5 F _3 L7 z8 p' {4 _
supporting current-carrying connections, and parts of non-metallic material within a distance! r) W) s- t, w; \# |4 [ I# l; V
of 3 mm of such connections, are subjected to the glow-wire test of IEC 60695-2-11.
3 V# Q9 j+ [) AHowever, the glow-wire test is not carried out on parts of material classified as having a glowwire4 e3 E+ z5 k8 M B( H. U
flammability index according to IEC 60695-2-12 of at least
. S5 P, s" `8 y3 e' S2 `! r: M( Q# l– 750 °C, for connections which carry a current exceeding 0,5 A during normal operation,
( Z. A# r f5 E1 W5 f– 650 °C, for other connections.
0 V6 l9 \0 g j3 ?$ m& d' TIf the glow-wire flammability index is not available for a sample with a thickness within6 w/ b5 z7 l2 ~; k
± 0,1 mm of the relevant part, then the test sample shall have a thickness equal to the nearest
7 M( J( o' C' ]! Y! Cpreferred value specified in IEC 60695-2-12 that is no thicker than the relevant part.! O3 L' ]8 P' t& k2 @2 h
NOTE 1 The preferred values in IEC 60695-2-12 are 0,75 mm ± 0,1 mm, 1,5 mm ± 0,1 mm and 3,0 mm ± 0,2 mm.
# c6 H& Q$ a$ r0 N$ m" UWhere a non-metallic material is within 3 mm of a current carrying connection, but is shielded
H) g, p4 S' C# P$ sfrom the connection by a different material, the glow-wire test of IEC 60695-2-11 is carried out
9 C9 U/ N7 e3 G: h& Lat the relevant temperature with the tip of the glow-wire applied to the interposed shielding
4 N/ k/ ^. t( a+ u& d* f# d7 i: Z- kmaterial with the shielded material in place and not directly to the shielded material.( v8 [6 z( i" a: d! y; d
When the glow-wire test of IEC 60695-2-11 is carried out, the temperatures are- t3 J9 z7 a$ [& N5 |. ?
– 750 °C, for connections that carry a current exceeding 0,5 A during normal operation,) Q$ b+ U- ]6 \2 z: h
– 650 °C, for other connections.
$ e& B+ T* t9 O# n/ A: G如果中间挡板能经受住同等温度的灼热丝测试,则不需要对零件3mm内挡板以外的非金属材料进行灼热丝测试,因为就算电弧导致起火,经过挡板隔离后是则不认为可以蔓延至外部零件的,故不需要对其外部零件进行测试。 |
|