|
|
4.10.1 For metal encased class II luminaires, contact between:) ~. ?2 W4 {, x$ k. t$ L4 j
– mounting surfaces and parts with basic insulation only,
3 ?1 W2 Q4 }; c3 E– accessible metal parts and basic insulation,- e9 t& Q0 e2 P! r" P1 ^
shall be effectively prevented.
: d, k8 s' v. x+ M% n/ I' MNOTE 1 This requirement does not exclude the use of bare conductors if adequate protection is provided.1 X' H' z3 k, q; O9 W
This wiring includes internal and external wiring of the luminaire, and fixed wiring of the
~4 y) M0 G+ r0 F+ e, [2 U+ C9 Z3 rinstallation.
6 y5 |& w/ E/ w2 X& @1 oClass II fixed luminaires shall be so designed that the required degree of protection against
3 d# L% l+ {6 D1 Y" w' z. velectric shock is not impaired as a result of the installation of the luminaire, for example by5 q0 ]1 m9 Q W4 J
contact with metal conduits or metal sheaths of cables.4 X; w! _, ^5 W! [- h: c& H1 e% ]
Capacitors shall not be connected between live parts and the body of metal encased class II
) H' \# N+ t: y+ B7 dluminaires, with the exception of interference suppression capacitors and switches meeting the( H4 S; q M' h* T! M
requirements of 4.8.8 z) K6 t/ q- e6 \6 u; L
The interference suppression capacitors shall comply with the requirements of IEC 60384-14: H. d/ H) k9 `7 V% x+ n- s; k3 n1 V
and the method of their connection shall be in accordance with 8.6 of IEC 60065.* r7 U" R+ t: A
NOTE 2 Contact between accessible metal parts and the basic insulation of internal wiring may be prevented by
2 ~8 u3 `: W/ ^2 wsleeves or similar parts which comply with the requirements for supplementary insulation.7 a6 i! S6 x' P6 M l2 l
Compliance is checked by inspection.0 M& _4 e- G" N
以上是IEC 60598-1的4.10.1部分，没有你描述的词语！是哪个版本的？  [s:90] [s:90] |
|
/1 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2008-6-6 10:30
收藏
分享
好帖
鸡蛋
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2008-6-6 15:25
楼主