|
30.2.2 For appliances that are operated while attended, parts of non-metallic material( H/ B; D8 Q N
supporting current-carrying connections, and parts of non-metallic material within a distance5 x8 Q1 z0 X3 t/ D3 I! }, L
of 3 mm of such connections, are subjected to the glow-wire test of IEC 60695-2-11.
- v9 c* s' v5 m: h- fHowever, the glow-wire test is not carried out on parts of material classified as having a glowwire! N& E; ~) s6 e4 `
flammability index according to IEC 60695-2-12 of at least
/ d: L1 A: i g! s/ g" O& k& w& E– 750 °C, for connections which carry a current exceeding 0,5 A during normal operation,
( f, f2 B& \+ @$ w( d8 D– 650 °C, for other connections., ?! M6 {2 f% C1 G+ @0 c/ [2 x
If the glow-wire flammability index is not available for a sample with a thickness within
# @ l$ j: C9 O± 0,1 mm of the relevant part, then the test sample shall have a thickness equal to the nearest/ H2 b! x! o: X8 B
preferred value specified in IEC 60695-2-12 that is no thicker than the relevant part.: u: }3 D, k# Q6 X& J6 Q
NOTE 1 The preferred values in IEC 60695-2-12 are 0,75 mm ± 0,1 mm, 1,5 mm ± 0,1 mm and 3,0 mm ± 0,2 mm.
. ^7 n Q( F* n6 ^# lWhere a non-metallic material is within 3 mm of a current carrying connection, but is shielded
( {$ d. K& _ R( `7 afrom the connection by a different material, the glow-wire test of IEC 60695-2-11 is carried out7 r& D# i2 G- k$ y5 a
at the relevant temperature with the tip of the glow-wire applied to the interposed shielding7 |+ W" F- d- j! H, c& b, q
material with the shielded material in place and not directly to the shielded material.) f x/ O& |7 \2 g# X' m4 s: l
When the glow-wire test of IEC 60695-2-11 is carried out, the temperatures are
) I; |# g, }6 E' h– 750 °C, for connections that carry a current exceeding 0,5 A during normal operation,
8 W m8 w) }+ h; r" C w. |4 X– 650 °C, for other connections.
0 G: P& j7 d- n; I% w如果中间挡板能经受住同等温度的灼热丝测试,则不需要对零件3mm内挡板以外的非金属材料进行灼热丝测试,因为就算电弧导致起火,经过挡板隔离后是则不认为可以蔓延至外部零件的,故不需要对其外部零件进行测试。 |
|