|
导线若小于18AWG者, 则可用于内部使用, 但需要被妥当的放置予安全且牢固的外壳内之方式, 并且能提供短路及不正常作工测试如测试131A所提及.% u) ?- e# \ J" O
; b c0 J; X/ Z* z0 H6 ]" o
131A Conductor Short Circuit and Abnormal Operation Test
/ W' |7 G& `. x( j0 `7 o9 Z+ E131A.1 General
. J7 n1 _9 n) c1 S( `131A.1.1 A portable luminaire, which has a series or series/parallel string of non-replaceable lights having
6 z- T$ {- R# W5 N; I8 sinternal conductors smaller than 18 AWG (0.82 mm2), in accordance with 27.1.5, shall be tested in. Z; g' V% _ o7 n7 I
accordance with 131A.2 and 131A.3. Compliance criteria is described in 131A.4.
' o7 p1 u: _0 n- s( a1 e( gAdded 131A.1.1 effective February 18, 20062 ~ n' b9 p! W
131A.2 Test method – short circuit
7 A( D. w: J9 Q131A.2.1 For the short circuit test, three samples are to be mounted as intended, draped with$ A1 [7 \8 ?0 P# {' W5 G. {
cheesecloth, and then a short circuit condition is to be introduced to simulate a line to neutral fault. The short should be located in the farthest series string to provide the maximum lead resistance.
6 \- v1 K% b# f" O. `5 {Added 131A.2.1 effective February 18, 20064 d |7 P: {' K. n1 m2 |; O
131A.2.2 The test is to be conducted:
( K; S6 J. e. f# q! J1 y5 W+ M7 ba) Until circuit interruption and resulting thermal stability occurs (usually no more than 10
) Q9 i4 ?5 k; c& B) G( Kminutes after circuit interruption);. j* M+ D3 Q2 R/ b( d4 a
b) 7 hours, when temperatures and current levels are being monitored and show no changes' x5 C$ _) ^9 C8 a9 ?
over 3 consecutive readings, 30 minutes apart; or7 ~6 O0 p' q" ~: W
c) 72 hours have transpired with no visual change, such as discoloration or distortion.1 d" v. Y- r' O2 e! J( h
131A.3 Test method – abnormal operation
! K. h- ?0 I" ?: J. ~* k5 ]% `, Y j2 n131A.3.1 Three samples are to be mounted as intended, draped with cheesecloth, and then a lamp is to be bypassed in the series string to simulate a shorted lamp. The bypassed lamp is to be located in the closest series string to provide the least lead resistance.' V5 b6 w2 m& v
Added 131A.3.1 effective February 18, 2006
" m* g# x. e3 ^; V3 p, b131A.3.2 The test is to be conducted:& l3 Q, ?1 C+ A
a) Until circuit interruption and resulting thermal stability occurs (usually no more than 101 H4 m0 i n' V! `3 ~9 e2 v8 \$ P
minutes after circuit interruption);
! Y& h. v1 C, V; E) E/ ub) 7 hours, when temperatures and current levels are being monitored and show no changes
/ f) [- J& P, o8 I# Gover 3 consecutive readings, 30 minutes apart; or
" {% e0 N9 V9 W5 Cc) 72 hours have transpired with no visual change, such as discoloration or distortion.
6 ^0 f( V) d0 J2 b: ~Added 131A.3.2 effective February 18, 2006. q! s" ?0 H3 X' N
131A.4 Test results
0 h! h0 Y( a, y& T% t131A.4.1 Acceptable results for the short circuit and the abnormal operation tests are no ignition of the cheesecloth or polymeric |
|