|
请参考IEC 60950-1 clause 1.5.6:- ^7 ?; [* }" J, i) Z
A capacitor connected between two line conductors in a PRIMARY CIRCUIT, or between one line
8 Z P0 ~( e" ?5 }) c8 Q+ c% ?conductor and the neutral conductor or between the PRIMARY CIRCUIT and protective earth
I" n! C+ @( s7 |+ Y$ t( ~shall comply with one of the subclasses of IEC 60384-14 and shall be used in accordance' K: M9 p4 j9 K9 P4 U. A( n
with its rating. This requirement also applies to a capacitor bridging DOUBLE INSULATION or s% o8 c0 R9 i5 f$ x, b: V
REINFORCED INSULATION elsewhere in the equipment. The details of the damp heat, steady
# _2 Z. a4 X$ Y1 fstate test as specified in 4.12 of IEC 60384-14 shall be as follows:
* H/ o6 e; z* w8 \& l# }# w8 x' u− Temperature: 40 °C ± 2 °C;, y4 l6 Z+ ] w
− Humidity: 93 % ± 3 % relative humidity;8 j7 G8 i$ M5 y% p
− Test duration: 21 days.6 y7 x. i2 k1 c+ A
NOTE 1 Capacitors that have been subjected to a test duration longer than 21 days are considered to have met
5 C" N+ D! j, S f. H7 Ythe test duration criteria.
$ U1 Q9 z) S' u* w8 b7 [The above requirement does not apply to a capacitor connected between a HAZARDOUS
8 r# \( g; [, q; r4 rVOLTAGE SECONDARY CIRCUIT and protective earth, where only BASIC INSULATION is required.
* I, M( H' d8 A7 X* E; Y( `! m& jNOTE 2 The test of 5.2.2 still applies between the HAZARDOUS VOLTAGE SECONDARY CIRCUIT and protective earth.* C: V/ W6 I9 G" B
The appropriate capacitor subclass shall be selected from those listed in Table 1C, according
( M0 i7 o6 i* f O4 Gto the rules of application in the table.
/ P% t9 s: z p% ~表格不会贴,所以还是自己找60950的标准好好看一下 |
|