|
|
本帖最后由 ljh809809 于 2015-10-27 12:08 编辑
7 T- X. @1 m& n/ v' s5 K' _5 a- ~; g: {, h2 J7 y4 }) S
9.5 If appliance inlets are arranged countersunk in the outer surface of equipment, and if this' r2 e! ^8 l0 v0 ]- w. r* L
surface is curved or inclined with respect to the axis of the appliance inlet, the arrangement+ _* a$ M. p; y8 e! w- m4 q
shall be such that, under any circumstances, the pin ends do not protrude beyond the limiting
- V: Q& i' ?2 Ksurface of the shroud.; t2 f; B2 f" }3 M$ G
Compliance is checked by connecting all pins, including the earthing pin, if any, together with
/ e: T$ _. q7 v! z9 _) l/ W; Hone pole of a contact indicator, the other pole being connected to a metal straight-edge ruler,( B; ]/ d" Z$ |7 p. H: B% e
having a width wider than the largest inside dimension of the appliance inlet, which is placed in
5 X* T3 P$ k4 c, X' z6 Jall possible directions over the opening of the shroud. The ruler shall not come into contact+ r, C2 q) A; Q& ]* y) @8 N
with the pin ends.
! o. w: C- U7 V# G3 f4 ^NOTE 1 For 10 A and 16 A appliance inlets for class II equipment, the test shall be carried out with a simulated earthing pin.
' V) \ @) N' |7 t- p5 E/ d& Q
; E/ y: s/ _5 ~7 V& v1 r问题：注1中， 如何用模拟接地插销来做检查？! |6 |% q8 _% Y9 y
9 _9 p- o( N5 ^
|
|
/2 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2015-10-23 17:34
收藏
分享
好帖
鸡蛋
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡