60598-2-20灯串标准第11。3条要求的温度是多少？

af204

广东安规检测
有限公司提供：

小型摆管淋雨试验机

IPX5X6X7喷水试验机

1000L恒温恒湿箱

各种试验指现货

可程式恒温恒湿试验箱

水平垂直燃烧机

自动卷线器试验机

耐划痕试验机

各种灯头量规现货

灼热丝试验机现货

GB1002插头量规

IPX1-X7淋雨现货

IEC61347/UL935镇流器热试验箱

灯具防风罩

IK冲击试验机

UL498插头插座量规

VDE0620插头插座量规

稳定性试验台

家电温升测试角

针焰试验机现货

热电偶焊机现货

家电125mm试验指

E12灯头量规

无绳壶无绳电熨斗插拔寿命试验机

IEC60335试验指甲

20.11.3 Lampholder contact shall be reliably secured in the lampholder body by means other
than friction to avoid such a displacement of the lampholder contacts that live parts of the
% F& ]" D4 e( c& O6 t, ~/ }, vchain become accessible. An example of an adequate securing method is by the provision of
: M& S2 b) j) v9 W2 E+ w: Oears on the contacts of the lampholder.
Compliance shall be checked by inspection and by the following test.
2 S; E% q- r- S* |% T0 {9 XSix lampholders are heated for 7 h according to the requirements of clause 12.3 of section 12 of
# O4 s# A1 X( P9 m" `IEC 60598-1 in an orientation to reach the highest temperature. After the lampholders have
cooled down to room temperature, the incandescent lamps are removed and a force of 15 N is
9 k+ e$ C1 F" S* S7 l; Vapplied for 1 min to each of the conductors connected. Following this, a force of 30 N is applied
for 1 min to the two conductors together. The forces are applied at a distance of 3 ± 0,8 mm
8 C1 ?0 c7 {  A$ Q; K7 Sfrom the insertion points in the lampholder so as to try to move the contacts from the
lampholders.
5 v) g# r: F9 t7 m+ @During the test the contacts shall not move more than 0,8 mm. An example of a device suitable
for this test is shown in figure 2.

/ f; b; g+ [9 U些段中要求的温度是多少？

af204

35度么？根据耐久试验，我用了35度

mountaindog

33~37度

heymutwo

是的，按照耐久的测试温度来。