|
电线要求:- w5 x" b M( u6 f2 {% H8 i8 [6 y
芯线:
! j. P0 s5 Q; X+ @" s+ \2.2 INSULATION3 M, b3 G8 b! k- U6 h/ l
2.2.1 Material# r6 m7 B! i0 A; U
Insulation shall comply with the requirements of one of the following materials, in
' s* N/ t, T- k: u6 `0 ^" V; ]! Vaccordance with AS/NZS 3808:
$ w0 T; n' g- @7 f5 e3 W Material groups Designation
: U% e* e, l' P, _0 o- bCross-linked elastomeric R-EP-90. R-CSP-90,R-CPE-90, R-S-150,R-S-2007 u1 b) R, T0 {- N6 A
外被:
) r5 ^* A; e* a, l2.6 SHEATH
7 H, I& A7 S) @. p; r! @+ G2.6.1 Material/ A7 Z* A) ] [) Z! j3 w0 `: C+ [
To operate the conductor at the maximum temperature appropriate for the insulation, the, s" W$ o# P0 I {% f: y
temperature rating of the outer and/or inner sheath may be less than that of the insulation by
( L. M3 }- T4 U' _/ `not more than 5°C. For cables with R-S-150 and R-S-200 insulation the maximum5 Y# P% L, {4 e& \, P
conductor temperature shall be limited to be not higher than 5°C above the maximum4 G/ m! L+ ]& J
permitted for the selected sheath material.2 a" Y5 L$ h' h* |$ f6 n
Sheath shall comply with the requirements of one of the following materials, in accordance
4 }$ ~1 {8 |1 \# C: m; h/ L% Mwith AS/NZS 3808:. Q4 R) C% J7 h, L: x9 I0 [
Material groups Designation! [' a! U7 u7 Z D9 o
Cross-linked elastomeric GP-85-PCP, HD-85-PCP,GP-90-CSP, HD-90-CSP,GP-90-CPE, HD-90-CPE,GP-150-S/ D* Y M! _8 ~- x( c
! y9 z3 P% T! W- I& m去看AS 3191-2008 的Table 2.5的第2,第3条2 V$ L4 L3 O: `2 C9 m: }, S9 y
2 All tests on insulation taken from ormeasured on the completed cord (seeNote 1)
* g5 h6 B# ~# K7 Z. O7 ?! R" pAs specified in AS/NZS 3808 for the relevant insulation designation' D) P$ e. T& h
. w! I% H* |: Y3 u7 B+ W3 All tests on sheath taken from ormeasured on the completed cord
6 @5 t: \! P- m2 xAs specified in AS/NZS 3808 for the relevant sheath designation
' H0 F; k9 y. b# h2 d
7 r E$ i) {! d1 p% z7 wNOTES:
% B( x0 S+ x$ o! v1 R: i( e4 y1 For the 250/250 V PVC insulated, unsheathed, parallel-webbed 2-core flat flexible cords with tinsel conductors, the insulation resistance constant (ki) shall be not less than 10 GΩ.m at 20°C and 0.005 GΩ.m at 75°C.
1 [4 n+ n0 I9 J p3 m) C/ J& E0 _( g+ B. D; r
老化条件: X' o! k0 d2 N+ w& w( n5 [2 k
去看AS 3808-2004的Table1和Table2 c8 G+ ^4 E" O5 p
90类芯线135±3℃ 168h! b' I' M( v9 h6 o
105类芯线150±3℃ 168h
: N; \2 Y* E9 Y* j+ x..........& E$ |: z' ] x, H F
具体自己看了。 |
|