|
111.2 Receptacles having the break-off tab, when provided, removed from one nonidentified terminal are to be subjected to ten conditioning cycles of manual insertion and withdrawal of a standard gauge, see Figure 111.1. Each of six devices is to be tested. The gauge is to be configured as outlined in Table 111.1. The force applied to insert the gauge for any of the conditioning cycles is not to exceed 40 lbf (178 N). The gauge is to have the dimensions indicated in Figure 111.1 but is not to have holes in the outer ends of the blades.9 b: O) L! _6 h$ E0 B/ s
插片无孔,地线圆形 |
|