|
Question: In § 4 of IEC 61048 and in § 3 of IEC 61049 rules for sampling plan are provided./ s3 n% k" V1 F" j4 H/ ]
Beside the main rule, the following additional statement is given: “The capacitor with
" i" U- s, r- e2 g- ~the maximum capacitance per unit surface area shall also be tested if this ratio* E0 f" Z0 i+ q, V5 g" p; Z
exceeds that of the maximum capacitance value in the range by 10% or greater.7 ?2 }1 A( b# C1 Y, ~! K0 X" H0 d
Similarly, the capacitor with the minimum capacitance per unit area shall also be/ n& a; b$ h; e& b- b
tested if this ratio is less than that of the minimum capacitance value in the range by
+ f$ [- r! z5 r3 G, i5 r5 Q10% or greater”. Nevertheless, the sampling plan is not well specified when the) J/ c. a, \+ J. E$ l3 |
above case occurs. How should be composed the final sampling for tests?* |* f1 b3 ]& N. B( w6 Q) U
Decision: For the time being to apply the following proposed solution:
: s! J) M* v4 ~) U5 B$ R ?When the above case occurs, each group referred to in § 11 of IEC 61048 or in § 4
, Y1 N# z' t& s$ t2 x& O3 a, W; sof IEC 61049 shall contain as nearly as possible equal numbers of capacitors of the
$ S, ?- r3 \+ rhighest capacitance and of capacitors with capacitance per unit surface area
) ]6 C) P$ [/ eexceeding that of the maximum capacitance value in the range by 10% or greater.
3 k( C* T. l/ q W. vSimilarly, each of those groups, shall contain as nearly as possible equal numbers of
9 \$ l- y: {* t! _4 ]' n8 \; Gcapacitors of the lowest capacitance and of capacitors with capacitance per unit5 _' b8 E0 G; m4 x
surface area less than that of the minimum capacitance value in the range by 10% or
S1 j2 q# n8 Q% k% ~' bgreater.
- c( }2 @0 f$ F5 b5 x5 ^) GExample – IEC 61048 - § 11 – self-healing capacitor.
" t6 R* u% D- Q9 LA sampling of 50 capacitors is required and according to the above decision they
0 @. @& z" Z% w1 _; _6 g' N$ k2 sshall be split as follows:
& m- c; l# \0 ~4 e, u7 u- 12 (13) capacitors of the highest capacitance in the range;$ m7 v u' G, P0 W
- 13 (12) capacitors with the maximum capacitance per unit surface area exceeding that of the+ @( ]# s0 Q5 a, e* J0 \8 Y6 ^
maximum value in the range by 10% or greater;
5 x+ g6 r& l$ Q; H" N [# p! D- 12 (13) capacitors of the lowest capacitance in the range;3 |2 C! A) h- \# A0 d
- 13 (12) capacitors with capacitance per unit surface area less than that of the minimum
0 i: R$ f* \5 ~4 acapacitance value in the range by 10% or grater.. \7 O! N+ {/ L0 \8 |* D) _
, O' o3 u) ?) X9 w+ ^, k) ~5 E |
|