软灯条刀压测试

Nezof

低于25V是可以裸露的，你的软管不是起绝缘作用的，除非你的电源是非隔离的

( b5 g* d2 `1 N$ p$ o3 [4 |所以我赞同你的看法

Kimi1

需要做的 跟有没有电击危险无关

stey

IEC 60598-2-20-2010的CLAUSE 20.16是要参考60598-1第13章节。
低压的绝缘材料也需要做球压，提供附加绝缘的塑胶件不需要做。
( p' h. p3 f5 vThe ball pressure test does not have to be applied to plastic parts of a luminaire which provide
supplementary insulation.

* N: g. b! o% |; a5 E13.2 Resistance to heat
; ]5 [6 P5 ?( v8 \
& \9 S$ l9 h  h' qExternal parts of insulating material providing protection against electric shock, and parts of
! c; r- J: K( L3 v' E. B1 Z9 Dinsulating material retaining current-carrying parts or SELV parts in position shall be sufficiently resistant to heat.

0 t' C4 b/ ~. d13.2.1 Compliance is checked by the following test:
" z  t- V8 P% `7 P1 [The test is not made on parts of ceramic material or on insulation of wiring.
: A7 @* |3 l+ b4 WThe test shall be made in a heating cabinet having a temperature 25 °C ± 5 °C in excess of the
operating temperature of the relevant part determined during the temperature test (normal
operation) of Section 12, with a minimum temperature of 125 °C when parts retaining currentcarrying
parts or SELV parts in position are tested, and 75 °C for other parts.