|
0 m- S* [: b/ n; rQuestion:
4 K K& |; W1 ZIn the application of IEC 61543 it was noted by various testing laboratories that note 1 of table 5 (referring to the impulse voltage test T2.3 for immunity to conducted unidirectional transients of the micro-/millisecond time scale) does not give information about the number and the polarity of the impulses to be given.: g! \; K7 \: |- X. K/ k: `" ]5 b
Decision:6 j& `- `* p0 m& s+ q% f
The mentioned note 1 shall be interpreted by replacing the first line by: K5 z7 Y8 s( l$ E- U( `
“This test shall be carried out with the RCD, in the closed position. A total of five positive and five negative pulses (for each phase angle) shall be applied synchronised to the voltage phase at the zero-crossing (0°) and the peak value of the a.c. voltage wave (90° and 270°), for each of the following tests:) B+ s. _: T, j4 |8 u
- between the metal support....”( k3 K: `- a6 K0 l* {1 W
6 l& y+ e, z; o! F
. {. b. a1 n( n! d2 p+ X
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?注册安规
x
|