|
引用第0楼pwong03492于2007-06-21 14:13发表的 Rubbing Test (插除测试) 以及使用的汽油规格 :
4 s; v' \' w3 ^$ t' z# z" h% X在诸多 IEC/EN 标准提到的 rubbing test, 都规定了使用汽油的规格, 如:: K' B" |0 y! [
1. IEC60950-1 2nd edition, 第1.7.11章节6 {# v! w. i' P7 U
2. IEC60065 7th edition, 第5章节( _$ ?. J$ L, L/ S) T
3. IEC61558-1 2nd edition, 第8.15章节2 x/ q; T- {" i. V$ F1 ^! V! h9 h
4. IEC60335-1 4th edition, 第7.14章节, 规定的汽油规格大致相同, 描述如下:; X2 u2 |2 m2 f$ [
....... ! Z: w; m9 k$ W$ D4 E8 F
标准把精制汽油搞得很复杂,又是规定材料成分,又是规定物理特性,其实主要是为了解释什么是精制汽油。, |$ b+ Z- v- w8 b c
2 |# h3 L5 ^, g- p, A: o% C$ \0 B( d实际试验时使用商品化的高标号汽油就可以,因为模拟用户实际使用状况是制定安全标准的一个基本原则。# {& ]% H! M/ ?( l+ j
/ j& C/ d4 j3 r% j; T. b& }The petroleum spirit to be used for the test is aliphatic solvent hexane having a maximum aromatics content of 0,1 % by volume, a kauributenol value of 29, an initial boiling point of approximately 65 °C, a dry point of approximately 69 °C and a mass per unit volume of approximately 0,7 kg/l./ u# @4 \1 |0 e' C. B: Q; Y: V
. N% A1 G7 B5 o+ x' @' @用于试验的精制汽油的脂肪烃类已烷溶剂具有最大芳香烃含量的体积百分比为0.1%,贝壳松脂丁醇(溶解溶液)值为29,初始沸点大致是65℃,干涸点69℃左右,单位体积的质量约为0.7Kg/L. |
|