安规网

标题: IEC60335-1功率测试问题 [打印本页]

作者: Misslanlan    时间: 2022-12-1 14:30
标题: IEC60335-1功率测试问题
小白发问:标准原文是下面这样,那对于标有电压上下限,比如220~240V,1000W的电动器具,到底是上下限电压都要测试功率,还是只测试230V的功率,怎么判断输入功率是否和电压算数平均值有关呢。 Test carried out at upper and lower limits of theranges for appliances with one or more ratedvoltage ranges, unless the rated power input is related to the arithmeticmean value6 ]$ h: ]* C' l1 j- p, {. W! {2 d

3 H2 j$ f% r$ C, Y2 W
3 D7 G1 E, p9 N
. Z# H" S8 H  W( Q7 D! G1 X
2 k0 A9 C! z% h+ b
作者: stey    时间: 2022-12-1 16:58
看产品标称,只标1000W这个功率按算术平均值进行测试,否则分别测试2个电压,分别标出功率。
作者: hillerhuang    时间: 2022-12-2 17:56
电压上下限差值不超过电压10%的,按照电压上下限的平均值测试.电压上下限差值超过电压10%的,按照下限和上限都测试.
作者: jtt1471025811    时间: 2022-12-5 11:52
标准第7.5章节不是有定义吗
作者: zyhua1985    时间: 2023-2-9 11:51
前来学习
作者: Jasonli小白    时间: 2023-2-10 15:56
比如适配器标100-240V, 上下限值超了10%, 就不能按电压的算数平均值算。
作者: XIAXI    时间: 2023-2-20 14:49
电动工具描述供参考
2 b( Z* G6 H' |2 J' l, F; X4 i! K0 s2 P$ G
8.1.2 For tools marked with more than one rated voltage, a rated voltage range or with ! C( y8 O' Z' j8 S" Q
more than one rated voltage range, the rated input for each of these voltages shall be 8 y) ]' z; E6 N7 w8 }0 g
marked.
3 _' {" Y# a6 A' r& M5 F% I" @* kThe upper and lower limits of the rated power input shall be marked on the tool so that the 1 G5 |0 n1 V/ @% G3 m0 |. ]; f4 X
relation between input and voltage appears distinctly, unless the difference between the upper
4 _1 N& E9 j$ G; I, u1 }and lower limits of a rated voltage range does not exceed 20 % of the mean value of the # w; O1 q2 {% K. y/ i7 N/ a. [
range,
in which case the marking for rated input may be related to the mean value of the 2 M2 ?% `' u" U6 U; a  ^
range




欢迎光临 安规网 (http://bbs.angui.org/) Powered by Discuz! X3.2