lianhu
发表于 2010-5-12 20:43
学习啦
zy3618
发表于 2010-5-22 21:33
UL62线两端脱皮上锡该贴何种UL标签?
Andy.Yang
发表于 2010-5-22 22:19
引用第51楼zy3618于2010-05-22 21:33发表的:
UL62线两端脱皮上锡该贴何种UL标签?
Processed wire...also one kind of UL wiring harnesses....
JSEMC
发表于 2010-6-24 01:20
哈哈,我也碰到了因为没有贴线束标签开VN的事,500块美金啊。
另外提醒大家一下,除了线材以外,还有就印有带UL Mark的贴纸,在进料时也要记得让贴纸厂商,在外包装上加贴他们公司的UL贴,不然的话查到了也一样会开VN,这个我们公司被开过。
看到有人在問電源線鐳射貼紙的,來一張給大家參考,再說明一下,這張貼紙有PS過,去掉了廠商的信號內容。
billma
发表于 2010-7-13 10:17
带线尾插C13,或带线尾座N5-15R,贴什么标签?
lymman
发表于 2010-7-15 13:51
UL 标签用法,很实用
456321
发表于 2010-8-11 14:45
请问一下,
1如果把引线发给别的厂商帮我们加工,需要贴什么样的UL标签?
2.如果买回的是有引线的组口应该贴什么样的UL标签?
以上,盼复,谢谢!
yuzh_ho
发表于 2010-8-19 14:05
好好学习。。。。。。。。
sisanba438
发表于 2010-11-10 10:17
Wiring harnesses (category ZPFW2)
Overview
This program provides traceability for wiring harnesses that are
assembled at off-site locations and intended for use as factory
installed components at an end-product manufacturing facility. They
are defined as components consisting of two or more wires joined
electrically and/or mechanically, and may include connectors, plugs,
strain reliefs, splices, etc. When assembled at an off-site location,
traceability for components used to construct a wiring harness is
not possible at an end-product factory location. This program can
be used to provide this traceability. Each wiring harness is normally
constructed in accordance with a harness diagram and is generally
designed for a specific application that is indicated on a diagram
or carton marking. These wiring harnesses are not intended for
field installation. An assembly consisting solely of a cord set, power
supply cord or power supply cord attached to an appliance such as
a motor is not eligible for coverage under this program.
Method of traceability
An off-site fabricator assembles a wiring harness in accordance with
a harness diagram, print or other specification from an end-product
manufacturer that details construction elements and components
to be used in assembling a harness. A harness manufacturer
will assemble a harness in accordance with these specifications
and, provided that a wiring harness is in compliance with these
specifications, it may be shipped with the UL Mark. Traceability for
these construction elements is further determined at an end-product
manufacturing location and involves verifying that these features
comply with an end-product Follow-Up Services procedure.
The UL Recognized Component Mark on the smallest bundle or unit
container in which a product is packaged is the only method used
to identify wiring harnesses manufactured under the UL Recognition
and Follow-Up Service programs.
edmond_wang
发表于 2010-11-15 18:39
接触多了,就习惯了。 但是VN 最好不要立即开,确认一下再说么。