|
|
在 power supply cord 标准UL817 和 成品标准针对 SR 的要求, 会有所区别的.$ q! Q/ E$ R5 M/ I( v$ |% ~5 D
如 fasten 兄所说, 在UL 标准的 strain relief 章节可以找到答案. 8 h% [' J( l5 M( X- r% T
5 l& n9 C1 e3 J/ w不同的标准, 输入线和输出线, 是有区别的, 所以还是要看具体的标准. 这里列举几个标准要求, 供参考
+ Y9 t( b; w7 T6 m* I6 m
/ R4 w0 H/ c# t5 o( k; f5 b1. UL1310 第41章节, U6 _, t- w) f- x- f: ]1 l$ ]
With internal connections disconnected, the strain relief means provided for a supply cord, or a multi-conductor output cord where the interconnection of outputs exceeds Class 2 shall withstand the force described in 41.3 applied to the cord for 1 minute without displacement or breakage of the cord or deformation of its anchoring surface.
+ F7 `' D2 I9 i) _请再细看标准: 输入线(35lbf 1分钟), 输出线(20lbf 1分钟), 内部连接短开, 标准说不允许有位移, UL实际控制在1mm.- s0 }% s3 q. e: _
" \1 {3 f% p( n2. UL697 第37章节 - 输入线 SR 吊重测试 X' H u3 v5 w; y
When tested in accordance with 37.2 and 37.3, the strain relief means provided on the flexible cordshall be capable of withstanding a direct pull of 35 pounds-force (156 N) applied to the cord for a period of 2 minutes without any displacement of the cord or deformation of its anchoring surface that would result in a potential risk of fire, electric shock, or injury to persons.
# c+ w0 V/ D' }请再细看标准: 输入线(35lbf 2分钟), 输出线(20lbf 1分钟), 内部连接断开, 标准说不允许有位移, UL实际控制在1mm.
9 j6 ?, b9 \4 f: ~& i; u0 a
" c! Z6 W: R+ d6 m3. UL697 第38章节 - 输出线 SR 吊重测试$ [1 U9 z# M% r. G
When tested in accordance with 38.2, the strain relief means and the output cord shall be capable
4 b v7 ~! W; R' p8 C: \4 Vof withstanding a direct pull of 20 pounds-force (89 N) applied to the cord for a period of 1 minute without displacement or breakage of the cord or deformation of its anchoring surface.
9 ^, d9 b- i! o3 y& ^, y请再细看标准: 输出线(20lbf 1分钟), 内部连接断开(标准虽然没说, 都这样做), 标准说不允许有位移, UL实际控制在1mm. |
|