BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E)

SUNNER4 · 发表于 2021-11-18 15:17

22.Z101
Stationary appliances part or all of the body of which are positioned at a height below 850 mm from the floor
and portable appliances that can be used on the floor shall not have accessible openings with a minor
dimension exceeding 5,5 mm.
This requirement does not apply to:
a) openings that have a bigger dimension where live parts or moving parts are positioned beyond an arc
of 30 mm centred on a perpendicular point 14 mm behind the face of the opening;
b) openings below 100 mm from the floor if they are not directly visible in normal use unless the
appliance generates glow or a continuous noise to attract attention;
c) on the rear/back surface that is parallel to the wall of appliances which, according to the instructions,
shall be placed against a wall or have a wall clearance of less than 30 mm when wall-mounted.
Compliance is checked by inspection and by relevant measurements with the appliance installed in
accordance with the manufacturers instructions without any parts removed.

怎么理解是取暖器出风口不能超5.5mm吗

465174785 · 发表于 2021-12-17 16:42

是指不能有超过5.5mm的开口

Liu · 发表于 2021-12-22 08:14

465174785 发表于 2021-12-17 16:428 _" a) T$ ~! q
是指不能有超过5.5mm的开口

首先你要确认的产品是驻立式的还是可移动式的，驻立式的高度是否超过了850mm，可移动式的是否是放在地面上的，如果是，再排除几个例外就可以确认是否可以开口大于5.5mm

herryhui · 发表于 2022-5-25 13:20

5.5mm的开孔

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[CE认证] BS EN 60335-2-30:2009+A11:2012 EN 60335-2-30:2009+A11:2012 (E)

点评

安规网为您推荐 /1