无绳壶15.2要做几个实验

花草树木 · 发表于 2010-10-25 14:00

广东安规检测
有限公司提供：

正如标题所说，无绳壶15.2要做几个实验

fengjunping · 发表于 2010-10-25 14:33

好象說得不清楚喔，是UL的還是IEC的？

花草树木 · 发表于 2010-10-25 14:51

引用第1楼fengjunping于2010-10-25 14:33发表的 :
$ q5 I( ]4 D, `# Z2 z: _好象說得不清楚喔，是UL的還是IEC的？

国标

花草树木 · 发表于 2011-4-6 11:18

有没有人告诉下啊

极品老工 · 发表于 2011-4-6 12:02

只知用漏斗淋连接座。真不知道还有多少个试验。

hushihong · 发表于 2011-4-6 13:00

具体来说是四个项目,实际测试是两个,一个是一溢水,一个是4楼说的测试,其它正常操作测试,耐压什么的都是附属测试

aaainmaya · 发表于 2011-4-11 19:05

1st (twice)
Detachable parts are removed.
The liquid container of the appliance is completely filled with water containing approximately 1 % NaCl and a further quantity, equal to 15 % of the capacity of the container or 0,25 l, whichever is the greater, is poured in steadily over a period of 1 min.
In case of doubt, the spillage test is carried out with the appliance deviating from the normal position of use by an angle not exceeding 5°.

For cordless kettles, the test with the kettle on the horizontal plane is carried out with the kettle both on and off its stand.

2nd -- Kettles that can be filled through the spout
Detachable parts are removed.
Tested on a plane inclined at an angle of 20° to the horizontal, with the spout uppermost.
filled with water containing approximately 1 % NaCl to the maximum level, if this indication is visible from the filling position, otherwise until water spills from the kettle.
A further quantity, equal to 15 % of the rated capacity of the kettle, is then added as quickly as possible
Only with the cordless kettle off its stand

3rd
Kettles are then filled to rated capacity with water.
They are placed on a plane inclined at an angle of 20° to the horizontal with their spout facing up the slope of the inclined plane.
Water shall not be discharged from the kettle

4th -- Stands for cordless kettles
The stand is placed on a horizontal surface
30 ml of water containing approximately 1 % NaCl is poured onto the connecting device.
The solution is poured steadily through a tube having an inner diameter of 8 mm over a period of 2 s, the lower end of the tube being 200 mm above the connecting device.
Judgment：The stand shall then withstand the electric strength test of 16.3, the test voltage for reinforced insulation being 2 500 V.

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	ASTC+那尔｜沙特SASO Saber GCC 埃及COC	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[其它标准产品] 无绳壶15.2要做几个实验