|
|
这是要分为两部分理解,是两种使用状态的测试要求:3 s$ J, H& c7 R J; C
第一: Electrically driven devices, if any, are in operation but are not in contact with the floor or any other surface or with the means used to seal the air inlet.
% U2 U) I! j7 G+ y6 G为(Mean Watt)平均功率,开、堵进气口而求出平均功率,但不能影响毛刷的正常运行;' l& I3 s; u) \" z: L; t
0 a1 @/ N+ e8 u
第二:The normal load is equal to the mean load Pr for the electrically driven agitating device such as a motor driven brush determined in accordance with the following:
9 |: q3 Z# X3 C2 W2 ?/ V– the agitating device operates on a carpet as specified in IEC 60312;
4 F X4 E' E$ n* u) b. y! v1 t– the mean load Pr is determined when using the device in the following way:% X! e4 R: ]$ Q
After setting the device, the device shall be moved twice over a distance of 5 m in the direction giving the highest load;
- c4 U+ t1 |- K7 x' t– the motor responsible for the airflow operates under the same conditions as determining Pf , i.e. no airflow restrictions, and measurements are taken after 3 min;
& h0 P& _% @* q* D( X– the device is adjusted to the carpet pile height;
% `1 q6 I8 j' K: M/ E O– it is necessary to move the agitating device slowly across the carpet to avoid carpet damage.) ?: M- A' W) ~9 c. p) E7 j
为在标准地毯上正常运行状态,要将毛刷档位调到最低,即最大负载 |
|