|
|
as below for EN request6 _1 B- t' P! |
& Z9 t2 L/ F0 J8 G- \) e
5.4 Cords on toys (see A.29)
: Z! d& v# K. e2 [Cords shall conform to the following requirements:# l- v1 B" F* x8 m2 t- o2 T
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20( M0 r, K1 j) D5 y/ q# \2 L
(cord thickness). This does not apply to ribbons.
( d+ Q8 F6 w1 a5 n% z1 ?9 D" ^# yBS EN 71-1:2005+A8:2009
8 n2 C9 F( i6 G' f6 R' A4 q% uLicensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)& r8 C' m7 J* Q4 I; b
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall* H1 P/ f4 M% L- p7 R% D
either:' X' B& G; Z; V) H) s& {
not exceed 220 mm when stretched by a force of (25 ± 2) N; or. o# b* ?' @0 Z% s" M. s1 I/ l* S
when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched) R/ G: r8 O# ~1 H/ d
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated3 c7 b( T: t ]+ S
without altering the characteristics of the joints (see Figure 10).
: s& n, }) g5 L0 x/ n* v! aThe free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing
: {! O' z/ I$ W, }point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall
- G2 j9 ?6 z; t. r& I. Pbe measured as a part of the entire cord (see Figure 11).
2 \! T5 _, j, g2 @3 |( v' }2 ~c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.
# I' T# x5 ~" }5 wd) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.- ~( `8 T+ L9 @+ V
e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
6 o2 R S9 a. m) Vstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|