|
|
Standard: EN 60745-1:2006
: J& D: {* G7 B/ bQuestion:
9 U2 A" }8 `" {' N# G3 W! V% p1) "Tools shall be so designed that the protection against electric shock is not affected when screws intended for replacement from the outside during routine servicing are replaced by screws having a greater length."* o. }) J _ j% `; M2 x+ c
What screw should be used? Only the screws from equipment under test or any other possible screw?
% y( c* Z2 |7 u1 J6 b. a2) "Compliance is checked by inserting longer screws, without appreciable force, after which creepage distances and clearances between live parts and accessible metal parts shall not have been reduced below the values specified in 28.1"
( \ X% h- j# AWhat force is to be applied?) A! c' Q7 N+ f5 w
Decision:$ \$ B9 r/ J/ _. x d! N8 [+ N' |& k6 r- k
1) The screw originally used on the equipment and any other longer screw that can be found on the equipment is to be used.
0 w0 _/ c' H8 b2) The force values in Table 9 shall be applied.) N$ I' T" u- A, z. t
5 r u8 B# R4 X" b5 }2 Z% a
4 \# f. w2 J, m6 | |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册安规
x
|
/1 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2017-1-8 17:51
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡