h0 w& {) P% {6 \* E6 n
哈哈，这也是我第一次在这里发贴，就是在发表的最下面有个“多个附件”，你点一下，就能添加图片了，多谢你的回复作者: ediqi 时间: 2010-1-16 10:00
Cords shall conform to the following requirements: : K. }/ }/ Q% `: X! ba) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.203 p% z" \7 v3 S: h! o/ q
(cord thickness). This does not apply to ribbons.* C" N9 I+ l' @7 _
b) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall ; W) f6 h3 Y! leither:$ H$ m1 Y# ^+ f' ?: t
not exceed 220 mm when stretched by a force of (25 ± 2) N; or 7 y2 {4 A. N$ I) B; `0 b* G when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched, I8 m. t7 F! }' M
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated( n3 d1 h( ?5 x' R
without altering the characteristics of the joints (see Figure 10). & F% E" `$ |6 o& A1 l# t2 [4 uThe free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing: Q; T3 }$ y8 q* ^
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall # ^$ Q' A3 M9 Obe measured as a part of the entire cord (see Figure 11). , v2 {" i2 E0 D5 K) x9 r& L+ f# l* Z. mc) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N. & E: H2 c9 p. s% K- O5 D8 m* Ud) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N. 9 {2 I7 w: ]" [, c' De) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when 5 _8 R; L8 f# Q9 t6 nstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 % 1 V* B8 x7 |* Llonger than their relaxed length.
