标题: 螺口灯座IEC 60238 标准疑问 [打印本页] 作者: 新秀新手 时间: 2020-7-23 09:42 标题: 螺口灯座IEC 60238 标准疑问 [size=17.1429px]螺口灯座IEC 60238 里面的机械强度16.6条款出有个注意就是： - T4 T5 X! X; |& @$ H0 ~% B[size=17.1429px] ) c8 m" }8 A9 W2 s; i' M0 h9 X4 K& ~. N
[size=17.1429px]NOTE The mechanical strength of lampholders used in luminaires or other equipment can be checked by means " ^( L1 @9 S) R l5 y[size=17.1429px]of the spring hammer specified in IEC 60068-2-75. In IEC 60598-1 , the test impact energy used varies from 0,2 Nm$ b: p: @- I6 F) v6 o9 v0 @6 Z
[size=17.1429px]to 0,7 Nm depending on component material and luminaire type. 6 T$ q; a9 _$ G, Y" L! L% r+ i8 R% ]: w2 ]
[size=17.1429px]. d, {. D1 L2 ]+ d+ i% H1 O x
& S! k6 O! W5 g' X: g: S[size=17.1429px]请问这句话的意思[size=17.1429px]是不是这个测试使用弹簧冲击锤测试等同于摆锤装置测试？包括所有螺口灯座？4 i( r0 N8 t( s; O0 N 作者: 新秀新手 时间: 2020-7-23 09:43
NOTE The mechanical strength of lampholders used in luminaires or other equipment can be checked by means of the spring hammer specified in IEC 60068-2-75. In IEC 60598-1 , the test impact energy used varies from 0,2 Nm to 0,7 Nm depending on component material and luminaire type.