标题: 耐压测试仪期间核查作业指导书 [打印本页] 作者: vicky827 时间: 2011-12-29 15:59 标题: 耐压测试仪期间核查作业指导书 这个耐压耐压测试仪期间核查用什么方法比较好呀? & ^6 T4 C4 @ R, ~6 J' r作者: riverheliu 时间: 2011-12-29 17:00
用定值电阻点检法作者: milighost 时间: 2011-12-29 17:02
运行检查也叫期间核查,是指的在校准周期内定期设置的故障条件,判别功能是否正常。 ) {3 _7 t" s( m2 \, A3 F4 X+ E( u9 s! H对于耐压测试仪其实可以比较简单,只要在设定的电压下将表笔短接看是否报警就可以了。作者: yxd2008 时间: 2011-12-29 18:19
论坛有贴子已有说明,自己搜索下吧作者: vickywu 时间: 2011-12-29 19:28
百度也可以搜啊作者: songbolove 时间: 2011-12-29 21:12
Prior to the test, the sensitivity of the dielectric tester - which indicates breakdown - was adjusted to indicate a breakdown when the tester was connected to a 120,000-ohm load. The applied voltage was started at zero, increased to the final value, and held at that value for the one minute.作者: songbolove 时间: 2011-12-29 21:14
Prior to the test, the sensitivity of the dielectric tester - which indicates breakdown - was adjusted to indicate a breakdown when the tester was connected to a 120,000-ohm load. The applied voltage was started at zero, increased to the final value, and held at that value for the one minute.作者: lawen.xiao 时间: 2012-2-28 12:10
表笔直接短接没现在不认可了,要用电阻法治具点检作者: novice-safty 时间: 2012-2-28 12:36
3C审厂和KTL审厂都要求的是用电阻法作者: douwang 时间: 2012-4-9 14:36
问一下第三方校准机构就行了作者: abu013 时间: 2012-4-10 10:52
我看电阻法可行.作者: mikk 时间: 2012-4-14 14:50
和校准的时候一样的··一个是输出的电压看偏差是否偏离了要求值,其次就是用标准的定值电阻看击穿电流是否准确·····JJG 759-2004