安规网

标题: 暖奶器(Milk heater)正常温升如何测试? [打印本页]

作者: seekyou    时间: 2010-11-17 19:22
标题: 暖奶器(Milk heater)正常温升如何测试?
IEC 60335-2-15:
6 n+ q; H; W0 k) {9 |11.7.102 For cooking pans, egg boilers, feeding-bottle heaters, glue pots, livestock feed
/ D# c4 R  B$ k4 a1 O: a0 a, Zboilers, milk heaters, sterilizers, wash boilers and for appliances that boil water other than4 R' T7 ~7 v" K: ^
kettles, the test is terminated.
, w7 x% @& y; y0 E3 m6 [) m- ~( ~– for appliances without a thermal control, 15 min after the water in the container has# f  i6 v$ J1 ^; n  K) U
attained a temperature of 95 °C or the maximum temperature it can attain if this is lower;; W! t% u6 E2 M3 m! i* r
– for portable appliances provided with a thermal control, 15 min after the thermal control) O+ d# a* N7 A/ I4 D
has operated for the first time;
0 w2 m: S7 o4 k% X# u– for fixed appliances provided with a thermal control, 30 min after the thermal control has* T- s4 T- c% Q" @  a" b( O
operated for the first time;6 k  x" _0 }4 t7 \
– 1 min after a continuous or repetitive acoustic signal having intervals of less than 5 s has
9 u7 i7 j$ _9 [2 o2 P1 c* {sounded;3 |- s! c3 a' d. ~+ h4 E
– when steady conditions are established, for egg boilers having provision for keeping eggs
  s* c; B$ u1 j5 N, pwarm, and appliances having a heated surface intended to keep liquid warm.# O9 T! y, l+ i. ]5 D3 B

  S! w$ Z7 u+ c( ?7 B* ?; w( K3 P2 d! r: X
现手上有一个暖奶器,工作时间由IC控制,到了一定时间自动停止工作(不到2分钟)。另有一个NTC起高温保护作用,超过一定的温度也会停止工作(正常工作时不动作)。; `& k7 {7 Y3 ]: G
这个产品做正常温升时做到什么状态结束呢?稳定状态?好像有点太严酷;第一个circle结束后15分钟?但产品实际只工作了不到2分钟,而且好像也不属于带thermal control的产品。请各位大侠给出自己的看法,小弟先谢过了!
作者: 546085603    时间: 2010-11-18 10:29
标准里不是写的很清楚吗!!念标准里做就行了,行就行不行就改
作者: zqw918    时间: 2010-11-18 13:34
好像有点太严酷,没什么好像的,布点,等稳定
作者: lizhijie211    时间: 2010-11-18 14:48
按标准做吧!
作者: supermanli    时间: 2010-11-30 11:46
标准就是老师呀。6 b; m" S' F/ ]1 P

4 p. t: U. f# N! K6 }. R" Q! {照做!
作者: bob_dai    时间: 2010-12-2 19:18
做19章的故障测试时,NTC失效之后靠什么保护?
作者: seekyou    时间: 2011-3-24 22:27
19章NTC失效后靠温度保险丝保护。3 M" Q+ z! A6 e) I
以上各位说按标准做的,标准是靠人来理解的。该产品每2分钟就会自动停止工作,相当于一个定时器,那正常工作过程中需不需要把这个“定时器”给失效呢?标准中并未提及。
. @: }& ?9 h0 _& X按我的理解,正常温升失效该“定时器”,等到NTC动作后15分钟结束测试。
  J, J2 R1 W! K! Z) U3 r4 T/ l不知道是否有不同的意见?




欢迎光临 安规网 (http://bbs.angui.org/) Powered by Discuz! X3.2